Home
My CV
Products
RastOrder Gallery
Links
Currency Converter
 
 

Other
RastOrder
Products

 

      Available Direct From RastOrder.

  Prices are plus 10% Australian GST if applicable.


CABLE DOUBLE HOOK:

Fits over 2mm shelf edge.  Suits Foldup cart.
Lightweight, aluminium, black - 120mm (4 ¾ inches) long & 25mm (1 inch) wide.

Price; AU$20.00  ea 



CABLE BOLTED HOOK:

Flat, with bolt hole.
Lightweight, aluminium, black - 120mm (4 ¾ inches) long & 25mm (1inch) wide.

Price; AU$20.00  ea


 For boom poles and antenna
poles - ideally 25mm (1inch)
2 x 5mm bolts.
 

Price; AU$15.00  ea
 TOOLFLEX CLAMP - Size - 20/30 mm
There are nut insert attachments on the sides of the SU & VKcarts. 
2 screw holes are narrower than the 30/40

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx


For boom poles and antenna
poles - ideally 30-40mm
(1.25-1.65 inch)
2 x 5mm bolts.

Price; AU$15.00  ea
 TOOLFLEX CLAMP - Size - 30/40 mm
There are nut insert attachments on the rear of  the SU, VK, Foldup, Mb carts 
 and on front of Mb cart.
2 screw holes are wider than the 20/30



For boom poles, antenna poles,
and cable hangers.
Single 5mm bolt.

Price; AU$15.00  ea
QUICK FIST  - CLAMPS - Size 25mm to 64mm (1" to 2.25")
There are nut insert attachments on the rear of the SU, VK, Foldup, Mb carts
and on front of Mb cart.
1 screw hole between the 30/40 toolflex hole.


UNIVERSAL BOOM POLE BOX

With slotted cutouts, front, back and bottom - for easy mounting to your cart.
Lightweight, aluminium, black.
65mm (2 ½ inches) L × 65mm W × 65mm H.
There are nut insert attachments for boom pole box.
On the rear of the SU, VK, Foldup, Mb carts.
On side of SU, VK.
On front of Mb.

Price; AU$30.00  ea 


CART COFFEE CUP HOLDER:

Has slotted cutouts, Front, back, top and bottom for easy mounting to any cart.
Lightweight, aluminium, black.
95mm × 95mm × 50mm
There are nut insert attachments for coffee cup holder on sides of SU & VK.

Price; AU$25.00  ea



Dual Monitor mount_folding.
These are similar (but not the same as) to the VK dual monitor mount)
They were made for the DD cart and attach to 2 nut inserts on either side frame.
Picture shows them with a 3ru rack panel substituting for a 3ru dual monitor.
The uprights can also be mounted at the rear.

These also fit on top of the lift off shelf on the FOLDUP cart.
They will need to be fitted (by the customer) with metal screws which will be supplied.


 Price; AU$65.00  a pair



DD Cart_SLIDING Shelf
Sliding shelf for DD cart only.
Bolts to side frame holes.
Dimensions - 300mm front to back. - 380mm wide.
No side lips.   3/4 extension.



Price; AU$100.00


Foldup cart rear upright extenders.



Price; AU$75.00 a pair.

These are available in 2 types. Ones that go over the uprights and those that go in the uprights.
Both end up in 25mm x 25mm  square tubes that the removable top shelf goes over.
Sizes 60mm, 30mm 40mm.


  Quick Release Wheels

Price, 16" only.
AU$132.00  ea - bare.
With tyre, heavy duty tube &
rim tape - AU$184.00 ea.

Freight International FedEx economy.
16" -  AU$150 per pair.
Freight Domestic AUS
16" - AU$85 per pair
Silver Alloy rim, Stainless steel spokes, stainless steel washers.
Incl bush and axle  Thread length on bush is 38mm (1.5 inches).
Bush thickness is 18mm
.
     



A good place to buy tyres from - http://www.chainreactioncycles.com/au/en
Generally for these rims, I use;
Maxxis Hookworm (16 x 195) on 16"
Maxxis Holy rollers (20 x 2.2) on 20",

 


M6 - Cage nut and 16mm screw
 
 Suit thicker aluminium rack strip as used on Rastorder carts.

These are available worldwide from  http://www.rs-components.com/index.html
M6 x 16mm screw  code is (553 683)
M6 cage nut for thicker rack strip is
(523 137)


Copyright © 2002 RastOrder P/L